1-20GHz Signal Gain 40dB Wide Band Low Noise Amplifier for satellite communication, measurement application
Description
The specific introduction of the 1-20 GHz Wide Band Low Noise Amplifier (LNA) is as follows:
Frequency Range: This amplifier covers a wide frequency range from 1 GHz to 20 GHz, making it versatile for various communication, radar, satellite communication, and measurement applications.
Low Noise: The amplifier is designed with a low noise figure, ensuring that the amplified signal maintains a high signal-to-noise ratio (SNR) critical for maintaining signal integrity and sensitivity in receiving weak signals.
Wide Bandwidth: Its wide bandwidth design allows for efficient amplification across a broad range of frequencies, making it suitable for applications requiring coverage across multiple frequency bands without significant loss or distortion.
Gain and Linearity: The amplifier provides appropriate gain levels while maintaining linearity, ensuring accurate and reliable signal amplification without introducing nonlinear distortions.
Applications: This type of amplifier is commonly used in RF front-end circuits, receivers, transmitters, microwave links, and instrumentation systems where low noise and wideband amplification are essential.
Performance: It offers stable and reliable performance, with features such as high isolation, good return loss, and excellent noise figure, making it suitable for demanding RF applications.
In summary, the 1-20 GHz Wide Band Low Noise Amplifier is a high-performance amplifier designed to provide low noise, wideband amplification across a broad frequency range, making it valuable for a wide range of RF and microwave applications.
Specification
Specifications subject to change without notice. Typical performance at +28VDC +25℃, and in a 50Ω system.
| ELECTRICAL SPECIFICATIONS@25℃ | ||||
| PARAMETER | MIN | TYPICAL | MAX | UNIT |
| Frequency Range | 1 | 20 | GHz | |
| Small | 40 | dB | ||
| Small Signal Gain Flatness | ±2 | dB | ||
| Noise Figure | 4 | dB | ||
| Output Power 1dBcompression | 13 | dBm | ||
| IP3 | dBm | |||
| VSWR Input/output | 2:1 | Ratio | ||
| DC Power Supply | 12 | Volt | ||
| Current | 300 | mA | ||
| ENVIRONMENTAL RATINGS | ||||
| PARAMETER | MIN | TYPICAL | MAX | UNIT |
| Max Input power | +20 | dBm | ||
| Operating Temperature | -40 | +85 | ℃ | |
| Non-operating Temperature | -55 | +125 | ℃ | |
| Relative humidity (non-condensing) | 95 | % | ||
| Altitude (MIL-STD-810F) | 10000 | 30000 | feet | |
| Shock / Vibration (MIL-STD-810F) | Airbone | |||
| MECHANICAL SPECIFICATIONS | |||
| PARAMETER | VALUE | LIMITS | UNIT |
| Dimensions | 40.7*16.8*8.1 | Max | Millimeter |
| Weight | 50 | Max | gram |
| RF Connectors Input | SMA-F | ||
| RF Connectors output | SMA-F | ||
| Impedance | 50 | Ohms | |
